Highlights from Huntsman’s Investors Call
August 5, 2022
Huntsman Corporation (HUN) CEO Peter Huntsman on Q2 2022 Results – Earnings Call Transcript
Aug. 02, 2022 7:03 PM ETHuntsman Corporation (HUN)
Q2: 2022-08-02 Earnings Summary
EPS of $1.28 beats by $0.14 | Revenue of $2.36B (16.70% Y/Y) beats by $57.99M
Huntsman Corporation (NYSE:HUN) Q2 2022 Results Conference Call August 2, 2022 10:00 AM ET
Ivan Marcuse – Vice President of Investor Relations
Peter Huntsman – Chairman, CEO and President
Phil Lister – Executive Vice President and CFO
Thank you, Ivan. Good morning, everyone. Thanks for taking the time to join us. Let’s [indiscernible] on Slide number 5. Adjusted EBITDA for our Polyurethanes division in the second quarter was $229 million compared to $208 million of a year ago, a 10% increase.
We achieved the increase in adjusted EBITDA and corresponding 17% EBITDA margins despite a volatile economic backdrop of unprecedented energy costs in Europe, COVID-related lockdowns in China and FX headwinds.
Please note that we did receive an insurance settlement, which benefited our second quarter results in polyurethanes by $15 million. We focused on our selling price and our value over volume strategy intently throughout the quarter. We passed through approximately $900 million of annualized increases in raw materials and energy costs, which approximately half were related to higher energy prices. Overall volumes declined 4% as we continued to pursue our value-based strategy.
In the Americas, negative growth was driven by some weakness in consumer-related end markets, primarily furniture and ongoing supply constraints in our Huntsman Building Solutions business. In Asia, our growth was negatively impacted due to government mandated lockdowns in Shanghai as the Chinese government attempts to control COVID outbreaks.
Volumes in Europe were up compared to the prior year due to favorable comparisons as we completed our once every 4-year Rotterdam turnaround in the second quarter of 2021. Excluding the Rotterdam turnaround, our volumes declined year-on-year. Addressing European near-term demand, we currently expect volumes to contract across several end markets as persistent and extraordinary natural gas prices impact consumer and industrial demand for polyurethanes.
During the second quarter, natural gas prices averaged around $31 per MMBtu. And today, they are at a record high of approximately $60 per MMBtu, over 6x the price in the United States. As a reminder, for every $1 per MMBtu change in natural gas, our variable costs in our European polyurethane business change by approximately $10 million on an annualized basis.
While the European facilities are not insulated from the price volatility in natural gas, it is worth pointing out that our largest natural gas derivative consuming facilities are in the Netherlands and in the United Kingdom, which have different supply dynamics and are relatively less dependent on Russian supplies compared to Germany. Also considered that from a natural gas pricing perspective, approximately 60% of our MDI natural gas-related production cost requirements are linked to U.K. pricing via our upstream nitrobenzene and aniline facilities.
Of course, our focus in Europe remains to maintaining the quality of our business and related pricing and margins as we navigate through a high level of economic volatility in the second half of the year. Huntsman Building Solutions platform recorded second quarter revenues of approximately $154 million, up 16% year-over-year, driven by pricing. We are well above the profitability we targeted when we launched Huntsman Building Solutions.
That said, we were hindered by constraints in blowing agents, which negatively impacted volumes versus the prior year. As we look into the early part of the third quarter, we do see some destocking of inventory at our customers from the impact mortgage rate increases in the U.S. are having on housing activity. We estimate that roughly half of HBS serves residential markets, while the other half serves the commercial construction markets.
We will continue to remain focused on growing HBS internationally and not valuing our polymeric MDI in the spray foam insulation systems. Spray foam is an increasingly versatile insulation with superior energy saving properties, which we expect to gain market share over time as energy conservation remains a priority for consumers and governments. For the second sequential quarter, our polyurethanes automotive platform saw improved volumes year-over-year.
Our automotive business is well positioned to recover with the market over the coming years, and we are focused on bringing innovative solutions to our customers. As we previously announced, we achieved a key milestone in the second quarter as we completed the commissioning of our new MDI splitter in Geismar, Louisiana. Today, the new splitter is running well.
The strategic investment will be a catalyst and allow further upgrades to our Americas portfolio. As we disclosed previously, once the new splitter is fully up and running, we expect it to add an incremental $45 million of annual EBITDA to our results by 2024. Lower propylene oxide margins in China drove our equity earnings lower year-over-year.
Our joint venture contributed approximately $18 million in equity earnings for the quarter, well below the $42 million reported the year earlier. Given current levels of PO margins, we expect that equity earnings could be approximately [$60 million] lower in 2022 versus the record earnings of 2021. In addition to upgrading margins by driving molecules into our higher-value margin products, we are intent on further optimizing our cost structure in polyurethanes to improve margins.
On an annualized basis, we delivered more than $40 million from our first phase of cost optimization synergies in polyurethanes. As we stated last quarter, we are targeting an additional $60 million by the end of 2023. These cost savings will be achieved through optimization of our footprint, for example, by exiting regions in markets where we — where the returns do not justify long-term supply such as Brazil and other regions with similar dynamics and continuing to lower back-office expenses. We expect the lion’s share of these savings to impact 2023.
Looking into the third quarter, we are closely watching all of the relevant economic and end market indicators and in particular, the situation in European energy crisis. As we sit here today, we expect polyurethanes additional EBITDA for the third quarter — excuse me, polyurethanes adjusted EBITDA for the third quarter to be in the range of $170 million to $200 million.
Let’s turn to Slide number 6. Turning to Performance Products. We reported adjusted EBITDA of $152 million for the second quarter, with an adjusted EBITDA margin of 31%. The industry dynamics in Performance Products remain favorable. In addition, with our commercial excellence programs and continuing focus on cost control, this division should continue to deliver strong results.
We do not believe this certain — we do believe that certain amine markets in China are moderating. Volumes decreased 3% compared to the prior year period as we continue to focus on securing value over volume and a short-term operational issue at our maleic facility in Europe, which has since been resolved. The construction markets that we sell into specifically in the U.S., which is primarily nonresidential construction continue to have good underlying demand.
We also continue to see positive dynamics in our global fuel additives markets. We’re impacted in China by the government-mandated lockdowns in softer composite demand. Despite the lower volumes, we still saw profitability and margin quality significantly improved year-on-year in all 3 regions. Last year, we announced targeted capital investments in polyurethane catalysts and differentiated chemicals serving the electronic vehicle, semiconductor and insulation markets.
These projects continue to progress and remain on schedule to be completed on time. We expect all these projects to contribute positively to results in 2023, deliver more than $35 million of EBITDA benefits in 2024. As a reminder, we hold leading market positions in many of our main product lines as well as our maleic anhydride. Performance Products remains a highly attractive division, and we continue to evaluate strategic organic investments to grow this business over the long term.
Looking to the third quarter, this tends to be seasonally weaker than the second quarter, and there are some currency headwinds. That said, we currently expect another strong quarter from Performance Products with third quarter adjusted EBITDA in the range of $130 million to $140 million, solidly above the prior year.
Let’s turn to Slide number 7. Our Advanced Materials division reported adjusted EBITDA of $67 million in the quarter, significantly above last year’s second quarter and equal to the strongest quarter in the division’s history. We achieved 20% adjusted EBITDA margins with a disciplined approach to value over volume.
We recorded the record results in Advanced Materials, even though aerospace profitability is still recovering at approximately 40% below pre-pandemic levels. In addition to improving product mix, we’ve been aggressive in achieving pricing to more than offset raw material inflation. We continue to deselect a lower-margin business while increasing our higher volume and value sales where possible.
We are growing at an above — we’re growing at or above several of our industries, adhesives markets as we deliver solutions to our customers, and our industrial adhesives portfolio is positioned to grow further over the coming years. In addition, our recent acquisitions of Gabriel and CVC, contributing strongly in delivering above our average adjusted segment EBITDA margins as we execute our pricing strategies and capture synergies.
Volumes for the segment declined 16%, with much of the volume decline, a result of our conscious decision to exit commodity BLR manufacturing in the U.S. as well as lower margin coating markets. We did see modest growth in aerospace demand versus last year, leading to a 25% year-on-year improvement in profitability. While aerospace remains well below pre-pandemic levels, the fundamentals of this industry remain strong, and we expect to see continued improvement over the next couple of years back to pre-pandemic levels.
Currently, we still see relatively stable underlying demand in many of our core specialty businesses in the Americas and Europe. We do expect normal seasonality, currency headwinds and some softening in Europe to impact the third quarter versus the second quarter. That said, we still expect to show a solid improvement versus the prior year. We expect adjusted EBITDA for this segment in the third quarter to range between $58 million and $63 million.
Let’s turn to Slide number 8. Our Textile Effects division reported adjusted EBITDA of $22 million for the second quarter. Sales declined 7%, driven by a 16% decline in volume and the business was adversely impacted by both new and continuing COVID-related lockdowns in China. As a reminder, roughly 60% of Textile Effects sales are in Asia, with China representing more than half of those sales.
Also impacting volumes were lower home and hospitality sales due to lower North American imports. Despite these volume headwinds, we remain focused on improving our differentiated specialty businesses while deselecting low-margin value-oriented volumes. In addition, we took aggressive pricing action to offset substantial raw material and logistical headwinds.
As a result of these actions, we were able to improve variable contribution margins, which helped to offset the negative impact of the lower volumes. We remain optimistic on the long-term fundamentals of Textile Effects. We are confident our specialty-oriented portfolio will continue to develop as brands focus more and more on sustainability and product innovation.
We expect orders to pick up as retailers stock up for the critical holiday period and related winter and spring apparel trends. We currently expect adjusted EBITDA in the third quarter to be similar to the prior year and project a range of $20 million to $22 million.
Thank you, Peter. Turning to Slide 9. Adjusted EBITDA increased by $98 million to $432 million, an increase of 29% compared to the second quarter of 2021. Sequentially, adjusted EBITDA improved by $17 million or 4%. As Peter highlighted, during the second quarter, we did benefit from an insurance settlement within our Polyurethanes division, which increased our adjusted EBITDA by approximately $15 million.
During the second quarter, we took the following steps: firstly, consistent with our Investor Day announcement to expand our global business services, we began the process of setting up regional service centers in Krakow, Poland and San Jose, Costa Rica. We expect those locations to be fully operational during 2023. Secondly, as Peter has indicated, we are exiting certain markets in polyurethanes.
In the second quarter, we communicated to our associates that we would exit Brazil, Argentina and Chile by the end of 2022, and we are in the process of evaluating positions in Southeast Asia and India. We have a number of additional cost savings initiatives in progress, including supply chain optimization, which we announced at our Investor Day. We remain confident of achieving our goals by the end of 2023. Turning to Slide 11. Regarding free cash flow.
We remain confident of achieving our 40% free cash flow conversion target in 2022. Capital expenditures remain on track towards our $300 million spend target for the year as we switch our attention from our newly commissioned Geismar MDI splitter to our various growth projects in our Performance Products division.
Phil, thank you very much. Two years ago, during our second quarter report, I compared the economic shocks and volatility of that time to the same as 1791 Whiskey Rebellion. As I look at today’s lack of clarity and uncertain outlook around the world, I’m reminded of the words of St. Paul to the Corinthians, “For now we see through a glass, darkly.” I’m not sure [indiscernible] was referring to European gas prices, but it seems he at least had something similar in mind.
We reported today adjusted EBITDA of $432 million, margins in excess of 18%, more than $500 million in stock repurchases over the past 6 months. Our balance sheet is strong, and our business is on track to meet our objectives that we set out at our most recent Investor Day meeting. So we look into the third quarter, we’ve given a guidance of between $330 million and $375 million of adjusted EBITDA. And I’ve watched these other companies who have reported guidance have been criticized for being too rosy or for being too [indiscernible]. We try to guide you on our future performances accurately and transparently as we see it at this time.
I see three issues that we will be facing during the second half that may well help us exceed these numbers or not. I’d like to address these issues and what Huntsman is doing to take advantage of them, where we can and try to mitigate their impact when we can’t.
The biggest challenge we see today is the energy crisis and natural gas volatility in Europe and to a lesser degree, globally. As I pointed out in my earlier remarks, every dollar of price movement affects us about $10 million annually. During these past 2 weeks, European gas prices moved nearly 20% upwards costing us in excess of $100 million on an annualized basis of added cost.
This past Friday, prices dropped 4%, saving us nearly $25 million on an annual basis. And this morning, the prices rose greater than 15%. I do not see any reason why this volatility would not continue since Europe has become overly dependent on the same means of propulsion Magellan used to navigate the globe, mainly wind, and natural gas supplies from an equally unreliable, but far more dangerously calculating Russia.
To count to this, we are aggressive as we can and with our pricing. Some may be content to play the shock absorber between consumer and energy producers. We will continue to push through price-related surcharge and price increases where we can. As we stated earlier, we’ve converted the vast majority of our European sales contracts from quarterly contract prices to monthly pricing and where we can also add the surcharges.
In some cases, this may well mean that we are walking away from certain sales. We’re also evaluating the feasibility of reducing production at some of our largest European facilities and increasing our imports from Asia and North America. It has become fairly clear to us that Europe’s energy problems will not likely be fixed anytime soon.
Accordingly, we’re more aggressively looking at our business footprint and cost structure. We are evaluating steps in addition to our previously announced cost reduction targets of $240 million to further reduce our costs and reposition our global business footprint. We announced this past month, we’ll be relocating a portion of our European business services to crack out Poland. We will look at further consolidation and site rationalizations as we calibrate our business around what may be a more permanent reality for Europe.
Our second challenge is inflation in North American markets and increasingly around the world. Increasing costs and rising interest rates will likely slow consumer demand and lower consumer confidence. In our largest North American business, polyurethanes, we started operating our new MDI splitter to give us greater access to a wider range of consumer solutions and higher-margin materials.
In our Advanced Materials division, we will continue to see the benefits of our adhesives and Additives acquisitions, which will have been fully — which have been fully integrated from an operational point of view as we reduce cost and continue to grow the business. We are seeing encouraging signs in the Aerospace sector and in many parts of the modernizing power in electronic sector as well.
Peter, I was wondering if you could elaborate on your decision to exit polyurethane businesses in South America. What drove that decision? And what sort of impact on sales and earnings might we expect as you move forward there?
Well, Kevin, good to hear from you. I hope you’re doing well. Yes, I think that as we look at the long-term margin prospects in this market. We look at the logistics, the working capital that’s tied up. We look at the tariff costs and so forth, the repatriation of capital.
When we factor all of these things, which you rarely talked about in these calls, but when you start factoring all of those issues, even if you’re earning the same margin in many of those markets as you are in, for example, in North America, your actual netback — the natural value that’s being created, in some cases, drops from what otherwise would be a 20% margin down to a mid- to low single-digit margin, I don’t see this changing. And so as we evaluate the markets as we evaluate where the growth and where the value is going to be, particularly the value. And I know that [indiscernible] beating a dead horse here and talking about value over volume, but I think so often, we get transfixed in this industry about growing sales. And we don’t look at the value of the sales. And in many cases, it costs us just as much to service and to supply and to produce a single-digit margin account as it does to get a 20% margin account.
And we need to be where those markets are going to reward us for innovation, reward us for the service and the technology that we invest in, reward our ability to uplift our molecules, our splitting capabilities and so forth. And frankly, while we see growth opportunities in many of these markets, we don’t see value opportunities as we do in North America. Again, that’s not to say that we’re going to completely abandon those markets, but it is to say that are focused in the infrastructure that we hold in each of those areas, the SG&A that we hold and the cost that we have — the fixed costs that we have to service many of those accounts that will be changing. And a lot of that tonnage will be going to higher end application, higher end margin applications a little bit closer to home.
Kevin, just to add, the South American Polyurethanes about $60 million of revenue, less than 1% of Huntsman’s overall sales revenue. And obviously, the North American market itself, there’s a high demand for the products that we would otherwise ship down to South America.
Congrats on the strong results. Just digging into the Q3 polyurethanes outlook a little bit more. So it’s down about $44 million quarter-over-quarter at the midpoint. I think $15 million of that would be the insurance proceeds not repeating. Is there any way you could walk through the other moving parts in that guidance, the impact from just lower durables demand from higher benzene costs and then from higher natural gas costs?
Yes. I think that we’re going to be seeing 2 impacts in the third quarter. The first and foremost is going to be the higher cost of our raw materials, particularly around natural gas products. And again, we’re talking about the variability of $10 million, $20 million, $30 million, $40 million, not that those have de minimis sums of money that I just [threw] out. But again, as I just look at the volatility of gas pricing over the last 2 weeks, we’re seeing on an annualized basis far greater than $20 million, $30 million, $40 million of value movement just on natural gas.
So much of where we end up in the third quarter will be the industry and Huntsman’s ability to move pricing and to — through surcharges and so forth in pricing to our customers and to move that down through consumers. And as you do that, that is obviously going to be impacting volumes. And so I think that, again, it’s going to be an issue about higher prices that will, at the same time, because of the rapid inflation we’re seeing in energy and in raw materials that higher price impacting volumes on a longer-term basis.
That would be one of the addition to make polyurethanes, obviously, has our largest exposure in Europe from a division perspective and with the euro having weakened even further, you’ve got an impact of about $5 million to $10 million between quarter 2 and quarter 3 to consider.
Just rather than sort of specifically talking about any sort of competitors or the like, I just broadly wanted to talk about the polyurethane industry as you guys see it right now. I mean, obviously, Europe is not an insignificant chunk of polyurethane capacity, and we obviously all know the sort of energy price situation over there. So the question really is that on a go-forward basis, how do you see the evolution of polyurethane sort of utilization rates globally or supply-demand fundamentals, keeping in mind, obviously — and again, not specific to any European competitor, but keeping in mind, I’d like to imagine maybe some Europeans are considering shutdowns, certainly reduced operating rates. So I mean, are we — as sort of these recessionary clouds recede, are we going to be in a situation driven probably by Europe that we are in very tight utilization rates, at least in the near to medium term?
Yes. And Hassan, you’re asking an excellent question. And if you really look at the industry and you think about the delta, and I’m just talking about really broad numbers here. You’re looking at over $1,000 per ton manufacturing cost difference between North America, Asia and Europe, right? North America and Asia right now are pretty competitive.
And you look at where Europe is right now, it’s around $1,000 per ton and in some cases, even higher than that. And if you think that is going to be the case over the course of the next 12 to 18 months, you really have to be arguing somewhere in some conference room right now. Do we start rationalizing capacity in Europe and start importing in from North America and Asia? If you think that this is a 6-month phenomenon or somehow between now and the early spring of next year that somehow prices will moderate and that gap will all of a sudden go down to a couple of hundred dollars a ton, $500 a ton or something like that. By the time you factor in freight, working capital, logistics, the excess capacity customers are going to be exiting from in order to satisfy the needs, you’re really not really not going to be able to shut down one site versus the next.
And so it really is a longer-term call as you look out not over the next quarter or 2, but it’s got to be one as you look out over the next 3 to 4 quarters. And I mean I’m literally just talking about some of the decision making, some of the challenges that we’re going through right now within our own company, is we don’t just not only look at polyurethane, but you look at some of the other products that we produce across the spectrum within our company, and you compare that with a natural gas price and an energy price. And when you look at the regulations, it’s not just on an energy basis, when you look at — there’s a lot of the very anti-competitive regulations that are coming out of the EU that are not going to be favorable towards industry on a longer-term basis, you’ve got to ask yourself some pretty tough questions here. And so it’s not a question about Huntsman or Huntsman’s German competitors [indiscernible] I look at it on a broader sense between urethanes, amines, epoxies between more commoditized and differentiated materials. Longer term, is Europe going to position itself to be even remotely competitive from an energy point of view, are they going to release the natural gas through fracking? Are they going to look at a nuclear? Are they going to — what is a longer-term perspective there for somebody like us that’s going to be investing in the decades to come, billions of dollars in maintenance and reliability and modernization, or you start moving out of the continent? And I think that the decisions that we’re making today are kind of the crash course as to what may be the road in the next 5 or 10 years that we’re going to have to travel anyways. We may be doing that over the course of the next quarter or 2. So sorry to ramble this on, excellent question.
It’s not just a simple black and white. You turn off one facility, you overrun another facility, and we export the availability of shipping backlogs [indiscernible] logistics, transportation tariffs and working capital, all that’s got to be factored in. What [indiscernible] especially as you move further and further downstream in a differentiated world, we’re pursuing value over volume, getting all that right. So again, apologies for a long-winded answer, but it’s an interesting question, and it’s not one with an easy answer, but I can imagine that the discussion that I just outlined, is not taking place in any company that has substantial North American, European or Asian assets and are looking at these cost differentials because they are historical, and we just simply we have never seen a delta of $1,000 a ton manufacturing difference just in MDI. And I imagine if you get into chlorine production, fertilizers, commodities, ethylene, olefins, whatever, you’re probably looking at pretty similar numbers across the board.
Nice quarter. Peter, I guess I’m glad you didn’t just — didn’t have a quote from The Book of Revelations for the external environment, but just a question on polyurethanes. When you think about placing your MDI molecules maybe by end market, are there certain end markets that have good returns now? Are the ones that maybe don’t have as good returns that you’re looking at? And aside from the regional, are the better markets for you to place your MDI?
Yes. I think that there are certainly some markets. And when I talk about these, we try not to focus on quarter-to-quarter, right? I mean if you look at what’s weak in the next month or a quarter or two, you have to be able to develop the product specifications and you have to be able to weather some of the cyclical storms and so forth. But as we look at automotive, it’s not just automotive, but as we look at some of the luxury brands, as we look at the EV, the lightweighting, as you start thinking about EV vehicles and cars in general, when you start thinking about self-driving cars.
Cars — the performance of the car, how fast it can go from 0 to 60 miles an hour is going to be far less important in the automobiles in the future than is going to be the comfort, the sound system, the information systems and the acoustic sounds and so forth, that’s going to be a lot more important to car manufacturers going forward, the lightweighting ability, safety. And so it’s not just saying we’re dedicated to the auto sector, but what sector within the auto sector as we think of something like insulation. There’s going to be sometimes when insulation, the tide goes in and the tide goes out and — but longer term, having the best [indiscernible] factor insulation in the world, being able to use the recyclability of used PET bottles and so forth as a raw material. That’s going to be a winner longer term. So we look at adhesions, we look at coatings, we look at lightweight and you start breaking that down, we get quite excited about those.
Now I take other segments. And again, I don’t want [indiscernible] segments, but I look at something like appliances. That’s a segment for us that we’re going to continue to be a part of, but that is also commoditized over the last couple of years. I look at something like furniture. There’s going to be segments of furniture like mattresses embedding the Tempur-Pedic, where there’s innovation and there’s margins that are paid in some of that area of furniture.
When you look at just the average sofa and furniture that 10 years ago was pretty attractive for polyurethanes. I’m not sure that’s a very attractive business for us going forward that we’re going to be getting a lot of value coming out of. So as you look at that commodity and we move that towards margins, that are 20-plus percent. And we want to see the stability of that urethanes business. Again, that doesn’t mean we’re always going to be the most profitable.
I hope it does mean that we’re not the least profitable, and it should mean that we’re one of the most consistent earners of around that high teens 20% sort of margin business. Yes, there are plenty of areas that we look at today. And even though they may not look all that exciting today, we want to continue in the construction, homebuilding, lightweighting, insulation, high-end automotive. So we’re going to continue to push into those areas and to push in within the best segments within those areas.
Peter, in Advanced Materials, do you have any updated thoughts on how much aerospace will be up this year and what that will leave you below pre-pandemic levels and when you would catch up those levels?
I would hope that as we look at the improvements that we see in aerospace, let’s remember that during the pandemic that we were down — pushing about $50 million of EBITDA from where we were — to the beginning of the pandemic to where we were at the depths of the pandemic. And I’d like to think that we have recovered probably about 40% of that. And I would — that’s going to be a lumpy recovery, but I would hope that certainly by the beginning of 2024 thereabouts. I mean I’m giving you a forecast on commercial airliners that I probably not qualified yet. I would assumably hope that by the beginning of 2024 that we’re back to kind of that pre-pandemic sort of volumes and margins and so forth.
But again, during this time period, there have been other projects that both Boeing and Airbus have been working on that we’ve qualified for. And I would hope that when the volumes get back to where they were previous to the pandemic that we’re actually doing better than we were previous to the pandemic. So I would hope that there are more applications as the industry looks at lightweighting. These high energy prices, by the way, high fuel prices, crude prices, natural gas price, you’re going to see the airline industry do everything they can to try to lightweight and putting a premium on saving fuel. Typically, when the economy slows, you think that they keep their more — they’re older, more depreciated their airlines in the fleet.
But when you have fuel prices as high as they are right now, we’re seeing a shift towards that lightweighting and anywhere they can replace a product with carbon fiber and they’re doing so. So I personally, am quite bullish as to us recovering sooner and better, but I think it’s still going to be over the course of the next 6 to 7 quarters or so before we’re fully back to normal. With that, operator, why don’t we take one more question. And given the fact we try to end at the top [indiscernible] a little bit over.
Our final question comes from the line of Josh Spector with UBS.
Just maybe this is related with the prior question, but Advanced Materials, industrial markets in Europe, I think you have 3Q comments that you expect it to remain stable. To me, that seems pretty different than what we’ve heard from companies over the past couple of weeks and even how you talked about polyurethanes. So what’s the difference for Huntsman in Advanced Materials in Europe that enables that stability?
Yes. I think that when we look at — again, there’s going to be some sectors that are falling there. But when we look at Europe, there are 3 areas in Europe that I’m quite bullish on over the next couple of quarters. One of them is aerospace. Airbus, obviously, located there, which is a very large customer of ours.
The other is the auto industry. Again, when we see this move towards lightweighting, carbon composite materials and so forth, insulation around — heat insulation around EV vehicles. We recently have won some exciting contracts that we won’t [indiscernible] the impact for the next quarter or so. But going forward, think about the temperatures in which these electric motors are operating, the batteries and so forth, those all need to be heat shielded as they are — they’re usually just mirror inches away from the driver. We qualified to have our products are both serving as the heat shield and also as the structural barrier between the driver and electric motors and batteries and so forth.
And the last is the power sector. So as you think about the grid systems that are being modernized, the grid systems that are being extended to include solar projects, wind projects, offshore projects and so forth, a lot of those are going to have transformers, cables, structural products where our materials have replaced ceramics and another — a number of older heavier applications, especially if you start looking at the marine — electrical marine applications. So that would — those would be three areas that we’re pretty bullish on.