Company News

October 28, 2020

Covestro Urethane Comments from Investors’ Call

Markus Steilemann

Good afternoon and good morning to our listeners from U.S. I’d like to begin with our Q3 highlights on Page 2.

Current times continue to be marked by the global coronavirus pandemic and its consequences in all areas of our life. After the drastic impact on the demand for product in Q2, however, demand recovered dynamically joined a course of the third quarter. As a result, our core volumes came in 3% above previous year. We achieved and EBITDA of EUR456 million, which was above market expectations and up to 7% year-on-year. Supported by higher earnings, we achieved a strong free operating cash flow of EUR361 million, 49% above previous year. As pre-released, we’ve raised our earnings guidance for the full year, reflecting a more dynamic recovery and the improved earnings levels.

Lastly and certainly a strategic highlight of Q3 on September 30, we announced the acquisition of the Resins & Functional Materials business from DSM. Meanwhile, the EUR447 million capital increase to finance part of the acquisition price has been successfully completed.

On Page 3, I would like to highlight some volume development by region, and as a concession to the exceptional time, also by industry in detailed numbers. The growth of global call volumes in Q3 was based on a broad demand recovery across industries and geographies. While our call volumes were significantly below previous year during the second quarter, they were already above previous year during the third quarter, reflecting a V-shaped recovery.

Demand from the furniture and wood processing industry increased by 6% year-over-year, driven by Asia-Pacific. Most of this growth was attributed to our polyurethane raw material for soft foams used in mattresses and upholstery. Demand appears to benefit from consumers who improved their homes during the lockdown weeks or instead of spending money for travel. Global volumes to customers from the construction industry finished a quarter 7% above previous year.

Looking at our polyurethane segment on Chart number 6. Call volume grew by 4.3% in Q3. Double-digit growth rate in TDI was strongest followed by single-digit growth in MDI and polyurethane around previous year’s level. Largest contributor to growth were applications and the furniture industry. Polyurethane EBITDA strongly increased both sequentially and year-on-year. Compared to Q3 last year, the increase was mainly driven by two factors. Firstly, the significantly lower cost levels, driven by our cost savings measures, and secondly, higher volumes.

As a result, our EBITDA margin increased nicely. Lower selling prices mainly in MDI and polyurethane were compensated by lower raw material prices. Hence, the year-on-year effect from the pricing delta was neutral.

Especially towards the end of the third quarter and into the first quarter, we noticed innovated industry margin levels in TDI globally. Simultaneously, we have been selling practically all available material to our customers working hard to fulfill customer orders. According to our analysis, these first and foremost reflect dynamic recovery and good underlying demand. However, it also suggests constraint industry availability. Including our reported force majority incidents in North America and Europe, TDI industry supply currently appears to be low nameplate capacity level.

Daniel Chung

Just three questions for me. To follow-up on the tightness in polyurethanes. Do you have any visibility on how this tightness may last in the next through the quarters? And then second question is quickly on the price war that delta. So with the indication that for four years and the minus 100 million in private key hole is around polyurethanes. How would you split back into the divisions?

Markus Steilemann

Daniel, this is Markus speaking. On your first question a few are tightness, it is very difficult to say, it is heavily depends on the competitors whether they solve their problems and here particular in TDI. And as you know and have witnessed over the past couple of years, given the market size compared to plant size in the TDI markets, that one plant is representing a significant amount of the world’s capacity. So one plant can make the difference between a totally oversupply and a totally under supplied market and with that also can lead to significant price movements in very, very short time. And that is further accelerated or amplified by the fact that it is very hard to store TDI and therefore puts TDI on stock for more than a couple of weeks. And in this context, there is more or less impossible to clearly say okay, it was developed like this is very developed like that.

Currently, we are due to the overall industry situation including ourselves in a short supply situation, but that could potentially change. But when this will be and to what extent this will be really for me impossible to focus at on MDI. We have a slightly different story. On MDI, again market size compared to plant size, it is not that impactful in one plant is actually not in service or maybe two or three plants are not in service for a short period of time for example due to unplanned shutdowns.

Secondly, there is some opportunities as we have a broader product range in MDI it is not as broad as in polycarbonates or CAS, but broader than TDI, roughly one on a different grades compared to roughly 10 different grades in TDI. That means also here we have different outlets that means also lower quality MDI that means less reactive, and therefore, let’s say a longer sword maybe can be sold in the market. So, as a little bit more buffer plus the market is structurally more gearing towards a balanced market, I would say and that will also continue if demand is developing more or less mid to long term as we predicted exactly in that direction of a balanced market. So overall, I would say for MDI, despite some shorter movements, I would say that we are approaching once again, a more balanced situation also with regard to the development into the next quarter.

Thomas Toepfer

On your second question, I think, I’m not sure that totally correctly, let me try and answer nevertheless. And then please ask again, if it’s not meeting at all, what you were shooting for. So, in terms of the pricing delta, we said for the full year, we are expecting a value of negative 100 million. If you build the bridge between 2019 and 2020. You have seen that for the first nine months of this year, it was negative roughly speaking 260 so that as a delta in Q4, we are expecting a positive pricing delta of roughly EUR150 million. And that is mainly and that goes back to what Markus just said those EUR150 million will mainly stem from our PR segment where we are seeing very constructive pricing in both in MDI and TDI. So I hope that was your question.

Isha Sharma

The first one is how similar or different is the outer situation at TDI and MDI to what we’ve already seen in 2017 for the market and then — specifically. And given that, is it fair to say that you’re exercising some caution when it comes to your price delta guidance for 2020, but also for ’21? The CEO of Dell, for example, mentioned that the isocyanates feistiness seems to be or might continue also in Q1 2021? Thank you.

Markus Steilemann

Isha, this is Markus speaking. Thank your question. While comparing two situations that are based on unplanned outages in the entire industry, let’s say amongst several years for me is a real challenge, I have to say, because the root cause for these outages might significantly differ, the magnitude of outages might significantly differ, and they’re unplanned. And that by nature makes forecasting possible. And in addition, I would feel really uncomfortable to say that those outages would continue to last significantly into the next quarter. Because we are doing actually the utmost to bring our plants back on track and back on stream. Because our aim is to supply customers based on their needs and to supply the demand. And also make sure that in particular MDI and TDI markets continue to grow. And from that perspective, I would have really a hard time to compare the outage situation in 2017, which has led to significant fly up margins to unprecedented also profitability and results. And from that perspective, would also not see how this was exactly compared to today.

Once again, we have a TDI situation in the United States based on a supplier issue with the key raw material that is also affecting PCS and MDI. And we hope that we get out of this situation as quickly and as soon as possible. And at the same time, we have a technically based failure in one of our parts in the TDI plant in Germany, but we also hope that we get out of the situation as soon as possible and plant can start delivering. And I cannot talk or say anything due to lack of insights about how the competitive situation is looking like in this context.

So yes, frankly speaking, a long answer, maybe not even an answer, but just let’s say an assessment of the situation. I hope that we’re back on stream as quickly as possible that we overcome this very unfortunate situation that we are in right now. And we can deliver to our customers as soon as possible. So that’s my best answer.

On TDI, as you might imagine once we are back on stream, we have a downside risk given that we still have a low overall industrialization, and also based on the high volatility of the prices, and therefore our respective, let’s say overall nameplate capacity is still much larger than the currently underlying demand. MDI once again to reiterate that here the situation is different, because I believe that we are continue to move too much balanced situation in the market. And that will continue also in 2021.

https://seekingalpha.com/article/4381875-covestro-ag-cvvtf-ceo-markus-steilemann-on-q3-2020-results-earnings-call-transcript?part=single

October 28, 2020

Multiple Dow Price Increase Announcements

October 28, 2020

TDI PRICE INCREASE


Effective November 15, 2020, or as contracts allow, The Dow Chemical Company,
on behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase
off-list prices by the amounts listed below on all grades and package types of the
following TDI product in North America:


VORANATE US $0.10 / lb

Polyol PRICE INCREASE


Effective November 15, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase off-list
prices by the amounts listed below on all grades and package types of the following
Polyol products in North America:


VORANOL US $0.04 / lb
VORALUX US $0.04 / lb
SPECFLEX US $0.04 / lb

MDI PRICE INCREASE

Effective November 15, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase off-list
prices by the amounts listed below on all grades and package types of the following
MDI products in North America:

ISONATE US $0.05 / lb.
ISOBIND US $0.05 / lb.
PAPI US $0.05 / lb.

MDI TRUCK PRICE AND LEAD TIME INCREASE

Effective November 1, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase prices
of bulk truck and packaged shipments by the amounts listed below of the following MDI
products in North America:

ISONATE US $0.05 / lb.
ISOBIND US $0.05 / lb.
PAPI US $0.05 / lb.

Effective immediately, Dow will be increasing lead times by an additional 2 business
days versus previously communicated lead time on all cited above MDI products for all
grades and package types in North America.


Thank you for your continued business with Dow. Please contact your Account
Manager if you have any questions related to this communication.


October 28, 2020

Multiple Dow Price Increase Announcements

October 28, 2020

TDI PRICE INCREASE


Effective November 15, 2020, or as contracts allow, The Dow Chemical Company,
on behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase
off-list prices by the amounts listed below on all grades and package types of the
following TDI product in North America:


VORANATE US $0.10 / lb

Polyol PRICE INCREASE


Effective November 15, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase off-list
prices by the amounts listed below on all grades and package types of the following
Polyol products in North America:


VORANOL US $0.04 / lb
VORALUX US $0.04 / lb
SPECFLEX US $0.04 / lb

MDI PRICE INCREASE

Effective November 15, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase off-list
prices by the amounts listed below on all grades and package types of the following
MDI products in North America:

ISONATE US $0.05 / lb.
ISOBIND US $0.05 / lb.
PAPI US $0.05 / lb.

MDI TRUCK PRICE AND LEAD TIME INCREASE

Effective November 1, 2020, or as contracts allow, The Dow Chemical Company, on
behalf of itself and its applicable consolidated subsidiaries (“Dow”), will increase prices
of bulk truck and packaged shipments by the amounts listed below of the following MDI
products in North America:

ISONATE US $0.05 / lb.
ISOBIND US $0.05 / lb.
PAPI US $0.05 / lb.

Effective immediately, Dow will be increasing lead times by an additional 2 business
days versus previously communicated lead time on all cited above MDI products for all
grades and package types in North America.


Thank you for your continued business with Dow. Please contact your Account
Manager if you have any questions related to this communication.


October 27, 2020

Covestro Q3 Results

Covestro with significant growth in volume and earnings in third quarter

Upward trend stabilized: Demand recovery continues

  • Core volumes up by 3.0%
  • Group sales total around EUR 2.8 billion (–12.7%)
  • EBITDA of EUR 456 million (+7.3%) driven by cost-cutting measures
  • Net income of EUR 179 million (+21.8%)
  • Free operating cash flow rises to EUR 361 million (+48.6%)
  • Guidance on full-year earnings raised
  • Announced acquisition makes Covestro one of the leading suppliers of sustainable coating resins

In the third quarter of 2020, Covestro increased core volumes by 3.0% year-on-year as the result of a significant improvement in demand. This development was largely driven by volume growth in the APAC region, particularly in China. At the same time, Group sales were down by 12.7% to around EUR 2.8 billion due to lower selling prices. As communicated on October 9, 2020, as preliminary key financial figures, at the time of publication EBITDA outperformed capital market expectations for the third quarter of 2020. At EUR 456 million, this figure was up by 7.3% over the prior-year quarter. The increase is attributable mainly to a lower cost level achieved with cost-cutting measures. Net income rose by 21.8% to EUR 179 million, while free operating cash flow (FOCF) grew to EUR 361 million (+48.6%). This development resulted from an increase in operating cash flows and reduced cash outflows for additions to property, plant and equipment, as planned.

Covestro CEO Dr. Markus Steilemann: “Although the coronavirus pandemic is still causing uncertainty, we have reacted decisively and have taken the right measures, which are now paying off. In the third quarter, demand from our customer industries experienced a strong rebound. The volume growth we achieved shows that we are meeting our customers’ needs and offering the right solutions.” Q3 2020: Covestro significantly increased core volumes and earnings, driven by an improvement in demand and lower cost levels.

Full-year guidance specified; earnings guidance raised

Covestro confirmed its full-year guidance for 2020 as adjusted on October 9, 2020. This assumes that economic activity will not be severely restricted again to curb the spread of the coronavirus pandemic. The Group now anticipates EBITDA at around EUR 1.2 billion in 2020 (previous: EUR 700 million to EUR 1.2 billion). In terms of core volume growth, Covestro continues to expect a year-on-year decline. The Group currently expects FOCF of between EUR 0 million and EUR 300 million (previous: EUR –200 million to EUR 300 million) and a return on capital employed (ROCE) in the mid-single-digit percentage range (previous: –1% to 4%).

“The recovery from the impact of the coronavirus pandemic has developed more dynamically than so far anticipated. In the third quarter, we were therefore able to significantly improve earnings,” explained Covestro CFO Dr. Thomas Toepfer. “Due to our strict focus on efficiency, we have achieved higher cost savings and additionally benefited from positive margin development. We were able to raise our earnings guidance for 2020 on this basis. Accordingly, we look forward to the fourth quarter with confidence.”

Acquisition announced: Covestro to be one of the leading suppliers of sustainable coating resins

On September 30, 2020, Covestro signed an agreement to acquire the Resins & Functional Materials (RFM) business of DSM for a purchase price of EUR 1.61 billion. This deal marks an important step for Covestro in its long-term corporate strategy to strengthen its sustainable and innovation-driven businesses. Integrating RFM into the Coatings, Adhesives, Specialties segment significantly broadens the company’s portfolio in the high-growth market for sustainable coating resins.

“The announced acquisition enhances the growth trajectory of our business and is truly a milestone on our way toward a circular economy: Along with RFM, we can meet global demand for sustainable products even better and drive innovations for the transition to a circular economy even more effectively,” stated Steilemann.

On October 13, 2020, Covestro successfully completed a capital increase in connection with the announced acquisition comprising 10.2 million new no-par value ordinary bearer shares that were placed with institutional investors through partial utilization of authorized capital. The gross proceeds amount to EUR 447 million and will be used to finance the acquisition.

Lower cost level in all segments; volume growth in Polyurethanes and Polycarbonates

The Polyurethanes segment saw core volume growth of 4.3% in the third quarter of 2020. Sales declined by 11.0% to EUR 1.3 billion mainly due to competitive pressure on selling prices in the prior year and a persistent lower raw material price level. EBITDA in the Polyurethanes segment rose by 12.2% to EUR 220 million. The positive effect of volumes sold and reduced cost levels as a result of cost-cutting measures increased earnings.

In the Polycarbonates segment, core volumes were up by 3.6% in the third quarter of 2020. Sales decreased by 11.1% to EUR 801 million mainly due to the development of the selling price level as a result of lower raw material prices. EBITDA in the Polycarbonates segment increased by 12.1% to EUR 148 million. An improved cost level as a result of cost-cutting measures and higher margins had a positive effect on earnings.

In the third quarter of 2020, the Coatings, Adhesives, Specialties segment saw a decline in core volumes of 6.9% on account of weaker demand from the automotive and transport industries as well as the construction industry. Sales were down by 15.8% to EUR 495 million chiefly due to lower total volumes sold and lower average selling prices. EBITDA decreased by 10.8% to EUR 99 million in the third quarter of 2020. A negative effect on volumes sold and a slight decline in margins put downward pressure on earnings. Reduced cost levels as a result of cost-cutting measures were unable to compensate for these effects. Q3 2020: Covestro benefited from a lower cost level in all three segments and clearly increased its core volumes in PUR and PCS due to improved demand.

Nine-month figures below prior-year level due to pandemic

After a challenging first half of 2020, Covestro saw demand from its main customer industries recover during the third quarter. On the whole, however, the results for the first three quarters of 2020 remained below the prior-year level. In the first nine months of 2020, core volumes declined by 7.9%, and Group sales were down by 19.4% to around EUR 7.7 billion. This was attributable mainly to reduced selling prices and lower total volumes sold. EBITDA therefore decreased by 37.0% to EUR 835 million, while net income amounted to EUR 147 million (–71.5%). FOCF was down, coming in at EUR 136 million (–4.9%).

https://www.covestro.com/press/covestro-with-significant-growth-in-volume-and-earnings-in-third-quarter/?kui=5zAeJCNvkKLxGEJC-Mr4sQ

October 27, 2020

Covestro Q3 Results

Covestro with significant growth in volume and earnings in third quarter

Upward trend stabilized: Demand recovery continues

  • Core volumes up by 3.0%
  • Group sales total around EUR 2.8 billion (–12.7%)
  • EBITDA of EUR 456 million (+7.3%) driven by cost-cutting measures
  • Net income of EUR 179 million (+21.8%)
  • Free operating cash flow rises to EUR 361 million (+48.6%)
  • Guidance on full-year earnings raised
  • Announced acquisition makes Covestro one of the leading suppliers of sustainable coating resins

In the third quarter of 2020, Covestro increased core volumes by 3.0% year-on-year as the result of a significant improvement in demand. This development was largely driven by volume growth in the APAC region, particularly in China. At the same time, Group sales were down by 12.7% to around EUR 2.8 billion due to lower selling prices. As communicated on October 9, 2020, as preliminary key financial figures, at the time of publication EBITDA outperformed capital market expectations for the third quarter of 2020. At EUR 456 million, this figure was up by 7.3% over the prior-year quarter. The increase is attributable mainly to a lower cost level achieved with cost-cutting measures. Net income rose by 21.8% to EUR 179 million, while free operating cash flow (FOCF) grew to EUR 361 million (+48.6%). This development resulted from an increase in operating cash flows and reduced cash outflows for additions to property, plant and equipment, as planned.

Covestro CEO Dr. Markus Steilemann: “Although the coronavirus pandemic is still causing uncertainty, we have reacted decisively and have taken the right measures, which are now paying off. In the third quarter, demand from our customer industries experienced a strong rebound. The volume growth we achieved shows that we are meeting our customers’ needs and offering the right solutions.” Q3 2020: Covestro significantly increased core volumes and earnings, driven by an improvement in demand and lower cost levels.

Full-year guidance specified; earnings guidance raised

Covestro confirmed its full-year guidance for 2020 as adjusted on October 9, 2020. This assumes that economic activity will not be severely restricted again to curb the spread of the coronavirus pandemic. The Group now anticipates EBITDA at around EUR 1.2 billion in 2020 (previous: EUR 700 million to EUR 1.2 billion). In terms of core volume growth, Covestro continues to expect a year-on-year decline. The Group currently expects FOCF of between EUR 0 million and EUR 300 million (previous: EUR –200 million to EUR 300 million) and a return on capital employed (ROCE) in the mid-single-digit percentage range (previous: –1% to 4%).

“The recovery from the impact of the coronavirus pandemic has developed more dynamically than so far anticipated. In the third quarter, we were therefore able to significantly improve earnings,” explained Covestro CFO Dr. Thomas Toepfer. “Due to our strict focus on efficiency, we have achieved higher cost savings and additionally benefited from positive margin development. We were able to raise our earnings guidance for 2020 on this basis. Accordingly, we look forward to the fourth quarter with confidence.”

Acquisition announced: Covestro to be one of the leading suppliers of sustainable coating resins

On September 30, 2020, Covestro signed an agreement to acquire the Resins & Functional Materials (RFM) business of DSM for a purchase price of EUR 1.61 billion. This deal marks an important step for Covestro in its long-term corporate strategy to strengthen its sustainable and innovation-driven businesses. Integrating RFM into the Coatings, Adhesives, Specialties segment significantly broadens the company’s portfolio in the high-growth market for sustainable coating resins.

“The announced acquisition enhances the growth trajectory of our business and is truly a milestone on our way toward a circular economy: Along with RFM, we can meet global demand for sustainable products even better and drive innovations for the transition to a circular economy even more effectively,” stated Steilemann.

On October 13, 2020, Covestro successfully completed a capital increase in connection with the announced acquisition comprising 10.2 million new no-par value ordinary bearer shares that were placed with institutional investors through partial utilization of authorized capital. The gross proceeds amount to EUR 447 million and will be used to finance the acquisition.

Lower cost level in all segments; volume growth in Polyurethanes and Polycarbonates

The Polyurethanes segment saw core volume growth of 4.3% in the third quarter of 2020. Sales declined by 11.0% to EUR 1.3 billion mainly due to competitive pressure on selling prices in the prior year and a persistent lower raw material price level. EBITDA in the Polyurethanes segment rose by 12.2% to EUR 220 million. The positive effect of volumes sold and reduced cost levels as a result of cost-cutting measures increased earnings.

In the Polycarbonates segment, core volumes were up by 3.6% in the third quarter of 2020. Sales decreased by 11.1% to EUR 801 million mainly due to the development of the selling price level as a result of lower raw material prices. EBITDA in the Polycarbonates segment increased by 12.1% to EUR 148 million. An improved cost level as a result of cost-cutting measures and higher margins had a positive effect on earnings.

In the third quarter of 2020, the Coatings, Adhesives, Specialties segment saw a decline in core volumes of 6.9% on account of weaker demand from the automotive and transport industries as well as the construction industry. Sales were down by 15.8% to EUR 495 million chiefly due to lower total volumes sold and lower average selling prices. EBITDA decreased by 10.8% to EUR 99 million in the third quarter of 2020. A negative effect on volumes sold and a slight decline in margins put downward pressure on earnings. Reduced cost levels as a result of cost-cutting measures were unable to compensate for these effects. Q3 2020: Covestro benefited from a lower cost level in all three segments and clearly increased its core volumes in PUR and PCS due to improved demand.

Nine-month figures below prior-year level due to pandemic

After a challenging first half of 2020, Covestro saw demand from its main customer industries recover during the third quarter. On the whole, however, the results for the first three quarters of 2020 remained below the prior-year level. In the first nine months of 2020, core volumes declined by 7.9%, and Group sales were down by 19.4% to around EUR 7.7 billion. This was attributable mainly to reduced selling prices and lower total volumes sold. EBITDA therefore decreased by 37.0% to EUR 835 million, while net income amounted to EUR 147 million (–71.5%). FOCF was down, coming in at EUR 136 million (–4.9%).

https://www.covestro.com/press/covestro-with-significant-growth-in-volume-and-earnings-in-third-quarter/?kui=5zAeJCNvkKLxGEJC-Mr4sQ